PLUG and SENSE

Added values

Models

Features

  • Waspmote Plug & Sense! encapsulated line offers to users:
    • Robust waterproof IP65 enclosure.
    • 10 models integrating more than 120 sensors.
    • Add or change a sensor probe in seconds.
    • Solar powered with internal and external panel.
    • Radios: 802.15.4, 868, 900, WiFi, 4G, Sigfox and LoRaWAN.
    • Over the Air Programming (OTA).
    • Special brackets ready for street lights installation.
    • Fully certified for the main markets: CE, FCC, IC, ANATEL, RCM, PTCRB, AT&T.

Smart Environment PRO

smart_environment_pro_model
Read more

Smart Environment PRO enables the Air Quality Index (AQI) calculation, thanks to 16 gas sensors providing extremely accurate ppm values and a high-end Particle Matter sensor.

Sensors:

  • Carbon Monoxide (CO) [Calibrated] (low and high concentrations)
  • Carbon Dioxide (CO2) [Calibrated]
  • Molecular Oxygen (O2) [Calibrated]
  • Ozone (O3) [Calibrated]
  • Nitric Oxide (NO) [Calibrated] (low concentrations)
  • Nitric Dioxide (NO2) [Calibrated]
  • Sulfur Dioxide (SO2) [Calibrated] (high accuracy)
  • Ammonia (NH3) [Calibrated] (low and high concentrations)
  • Methane (CH4) [Calibrated] – and other combustible gases
  • Molecular Hydrogen (H2) [Calibrated]
  • Hydrogen Sulfide (H2S) [Calibrated]
  • Hydrogen Chloride (HCl) [Calibrated]
  • Hydrogen Cyanide (HCN) [Calibrated]
  • Phosphine (PH3) [Calibrated]
  • Ethylene Oxide (ETO) [Calibrated]
  • Chlorine (Cl2) [Calibrated]
  • Particle Matter (PM1 / PM2.5 / PM10) – Dust Sensor
  • Temperature
  • Humidity
  • Atmospheric pressure
  • Luminosity (Luxes Accuracy) for Smart Lighting
  • Ultrasound (distance measurement)

Sensor Probes

Change sensor probes in just seconds

Sensor probes can be attached easily by just screwing them into the bottom sockets. This allows you to add new sensing capabilities to existing networks in just minutes. In the same way, sensor probes may be easily replaced in order to ensure the lowest maintenance cost of the sensor network.

Smart Agriculture

smart_agriculture_model_!
Read more

Smart Agriculture is designed to perform vineyards monitoring for enhancing wine quality, selective irrigation on golf courses and conditions control in greenhouses among others.

Sensors:

  • Soil moisture (3 depths)
  • Soil temperature
  • Leaf wetness
  • Solar radiation (PAR and UV)
  • Atmospheric pressure
  • Stem, truck and fruit diameter
  • Anemometer
  • Wind vane
  • Pluviometer
  • Air temperature
  • Air humidity
  • Luminosity (Luxes Accuracy) for Smart Lighting
  • Ultrasound (distance measurement)

Solar Powered

External and internal Solar Panel

Battery can be recharged using the internal or external solar panel options (common USB-recharging is of course another option).

The external solar panel is mounted on a 45º holder which ensures the maximum performance of each outdoor installation.

For the internal option, the solar panel is embedded on the front of the enclosure, perfect for use where space is a major challenge.

The rechargeable battery has a load of 6600 mAh, what ensures non stop working time during the weeks where the sunlight is lower.

A non-rechargeable battery option of extreme load (26 Ah) is also possible for projects where a solar panel can not be used.

Smart Water

smart_water_model
Read more

Smart Water allows to monitor water quality in rivers, lakes and the sea.

Sensors:

  • pH
  • Oxidation-Reduction Potential (ORP)
  • Dissolved Oxygen (DO)
  • Conductivity
  • Temperature
  • Turbidity
  • Calibration Kits for the sensor probes available

Installation

Fast deployment

Waspmote Plug & Sense! counts with holders specially designed for outdoor installations in street-lights and building fronts.

Metal cable ties are provided to easily adjust the node to street light posts.

Installation can be done in minutes as you only need to tie the cables on the enclosure holders and then to the post. Once the node is secured just press the on button and the node will start automatically to send the data gathered from the sensors to the Gateway.

Smart Water Ions

smart_water_ions_model
Read more

Smart Water Ions specializes in measuring ions concentration enabling water quality control in rivers, lakes and the sea.

Sensors:

  • Ammonium (NH4+)
  • Bromide (Br)
  • Calcium (Ca2+)
  • Chloride (Cl)
  • Cupric (Cu2+)
  • Fluoride (F)
  • Iodide (I)
  • Lithium (Li+)
  • Magnesium (Mg2+)
  • Nitrate (NO3)
  • Nitrite (NO2)
  • Perchlorate (CIO4)
  • Potassium (K+)
  • Silver (Ag+)
  • Sodium (Na+)
  • Temperature
  • pH
  • Calibration Kits for the sensor probes available

Radio Technologies

High sensitivity and trasmission power

There are multiple radio options in order to communicate the sensor nodes with the Gateway. 802.15.4, 868 and 900 are used commonly in order to create local, start topologies. WiFi can be used to connect with any WiFi AP while the 4G radio can be used to send the sensor data directly to the Cloud without using an intermediate Gateway. Sigfox and LoRaWAN modules are special for IoT applications and get very long range links.

The complete list of the available radios is:

  • 802.15.4 (2.4 GHz), 2 versions: Europe and world.
  • RF (868 MHz)
  • RF (900 MHz), 3 versions: US, Brazil and Australia
  • WiFi (2.4 GHz)
  • 4G, 3 versions: Europe/Brazil, US and Australia.
  • Sigfox, 2 versions: Europe and US
  • LoRaWAN, 2 versions: Europe and US

Smart Cities PRO

model_cities_pro
Read more

The main applications for this Waspmote Plug & Sense! model are noise maps (monitor in real time the acoustic levels in the streets of a city [LeqA in dBA]), air quality, waste management, smart lighting, etc.

Sensors:

  • Noise / Sound Level Sensor (dBA / LeqA) + Calibration Tests
  • Particle Matter (PM1 / PM2.5 / PM10) – Dust Sensor
  • Carbon Monoxide (CO) [Calibrated] (low and high concentrations)
  • Carbon Dioxide (CO2) [Calibrated]
  • Molecular Oxygen (O2) [Calibrated]
  • Ozone (O3) [Calibrated]
  • Nitric Oxide (NO) [Calibrated] (low concentrations)
  • Nitric Dioxide (NO2) [Calibrated] (high accuracy)
  • Sulfur Dioxide (SO2) [Calibrated] (high accuracy)
  • Ammonia (NH3) [Calibrated] (low and high concentrations)
  • Methane (CH4) [Calibrated] – and other combustible gases
  • Molecular Hydrogen (H2) [Calibrated]
  • Hydrogen Sulfide (H2S) [Calibrated]
  • Hydrogen Chloride (HCl) [Calibrated]
  • Hydrogen Cyanide (HCN) [Calibrated]
  • Phosphine (PH3) [Calibrated]
  • Ethylene Oxide (ETO) [Calibrated]
  • Chlorine (Cl2) [Calibrated]
  • Temperature
  • Humidity
  • Atmospheric pressure
  • Luminosity (Luxes Accuracy) for Smart Lighting
  • Ultrasound (distance measurement)

Geolocation Tracking + Sensing

Real-time tracking applications

The 4G module features a GPS receiver which allows to easily perform real-time tracking applications.

The idea is simple: read the GPS coordinates (longitude and latitude) and send them by using a HTTP request to a web server along with extra information from the sensors included in the node. Then use a browser to load the PHP webpage which uses Google Maps to show the location in real-time.

Smart Parking

parking_model_new
Read more

Smart Parking allows to detect available parking spots by placing the node on the pavement. It works with a magnetic sensor which detects when a vehicle is present or not.

Sensors:

  • Magnetic field (3 axis)

Benefits:

  • LoRaWAN / Sigfox (double radio)
  • Small and weatherproof enclosure (IP68)
  • On-road, surface installation
  • Out-of-the-box operation (no programming needed)
  • Remote Manager
  • Extended battery lifetime

Industrial Protocols

Connect your industrial devices to Plug & Sense!

Plug & Sense! units are able to connect with the most common industrial communication protocols: RS-232, RS-485, Modbus, 4-20 mA (current loop) and CAN Bus. This feature opens a wide variety of applications for industrial sensing and automation, military, automobile, vehicle tracking or remote factory management.

There are 3 main uses:

  • Connect any sensor to an existing industrial bus.
  • Add wireless connectivity to wired buses.
  • Connect industrial devices to the Cloud

Smart Security

smart_security_model
Read more

The main applications for this Waspmote Plug & Sense! configuration are perimeter access control, liquid presence detection and doors and windows openings. Besides, a relay system allows this model to interact with external electrical machines.

Sensors:

  • Relay to control external DC units. (<30VDC, 1A)
  • IR human presence
  • Hall effect (doors and windows openings)
  • Water presence
  • Liquid level
  • Liquid flow
  • Temperature
  • Humidity
  • Atmospheric pressure
  • Luminosity (Luxes Accuracy) for Smart Lighting
  • Ultrasound (distance measurement)

External SIM Socket

Choose your own Mobile Network Operator

Plug & Sense! models with 4G radio have an External SIM socket which allows developers to easily add and change a carrier SIM card in order to connect the devices to any 4G / 3G / GPRS / GSM cellular network.

4-20 mA Current Loop

4-20
Read more

The applications for this Plug & Sense! model are focused on adding wireless connectivity to 4-20 mA devices and connecting them to the Cloud.

Applications:

  • Sensors and instruments
  • Remote transducers
  • Monitoring processes
  • Data transmission in industrial scenarios

The user can choose among a wide variety of standard sensors

Industrial Protocols

Ready for any market

Plug & Sense! is the first IoT sensor platform to be fully certified:

  • CE (Europe)
  • FCC (US)
  • IC (Canada)
  • ANATEL (Brazil)
  • RCM (Australia)
  • PTCRB (cellular certification for US)
  • AT&T (cellular certification for US)

Radiation Control

radiation_control_model
Read more

Radiation Control is designed to measure the radioactivity levels. It includes a Geiger sensor which detects gamma and beta particles.

Sensors:

  • Geiger tube [ ß, ? ] (Beta and Gamma)

Data to the Cloud

Fully compatible

The sensor data gathered by the Waspmote Plug & Sense! nodes is sent to the Cloud by Meshlium, the Gateway router specially designed to connect Waspmote sensor networks to the Internet via Ethernet and 4G interfaces.

Ambient Control

ambient_control_model
Read more

Ambient Control allows to you to create basic environment parameters monitoring using the temperature, humidity, atmospheric pressure and luminosity sensors. As well as this, movement and vibrations can be measured by the internal accelerometer.

Sensors:

  • Temperature
  • Humidity
  • Atmospheric pressure
  • Luminosity (LDR)
  • Luminosity (Luxes Accuracy) for Smart Lighting

Libelium delivers a powerful, modular, easy to program open source sensor platform for the Internet of Things enabling system integrators to implement reliable smart cities and M2M solutions with minimum time to market.

Check how we can help you

Contact us!